Speed Engineering
Speed Engineering BMW F20 F21 LCI Brake Cooling Kit (114d, 118i, M135i & M140i)
Speed Engineering BMW F20 F21 LCI Brake Cooling Kit (114d, 118i, M135i & M140i)
Couldn't load pickup availability
In Stock & ready for next working day delivery
Estimated lead time 2-3 working days. Subject to availability.
Get the best deal with Duco's Price Match Policy
Are you regularly on the track and pushing your F20/21 LCI facelift to the limit? Then we also have the right thing for you to cool your brake system as effectively as possible!
Air duct inlet
Our track kit is designed for the F20/F21 LCI (FL version with M package bumper). Intended for regular track use, this brake cooling kit offers maximum cooling performance. We supply flow-optimized funnels that replace the original inlet funnels in the front bumper and the brake air duct, and have a classic ventilation hose connection (51mm).
Air duct outlet
We use the channeling of airflow towards the center of the brake disc to use the turbine effect to cool the disc from the inside out. In doing so, we target the pane at an angle that does not lead to any wastage, so that the air volume can be used as efficiently as possible. Due to the light construction in combination with powdered aluminum, the component is sufficiently strong and at the same time light and insensitive.
IMPORTANT: The different models vary slightly in the wheel position, coupled with different chassis geometries, as well as wheel and tire combinations, it is impossible for us to cover all variants. In the worst case, the wheel could touch slightly when the steering wheel is fully turned (which should only be the case when parking), which cannot damage the tire.
- 1x left air duct inlet for the front axle
- 1x right air duct inlet for the front axle
- 1x left anchor plate for the front axle
- 1x right anchor plate for the front axle
- 3x air hose = 3 meters
- 4x hose clamp
- BMW 1 Series F20 LCI (2014-2019)
- BMW 1 Series F21 LCI (2014-2018)
Both models requires M Package Bumper. With the exception of 4WD models, some drilling changes are required on the anchor plate.
To ensure the part(s) you have ordered fits your vehicle, we run a compatibility check prior to dispatch. We can do this either using your registration number(UK) or the last 7 digits of your VIN. Simply enter your car details prior to checkout.
SE13322
Manufactured by
Speed Engineering
