Creating a true Motorsport exhaust system requires a delicate balance of flow and harmonics. Extensive engineering and testing has produced a truly unrestricted exhaust with an exhilarating symphony of engine sound without annoying rattles, drones, or reverb cabin noise. Your stereo system may be out of a job!

• Stock Sport Exhaust 96 Decibels - Dynamic Mode
• IE Catback 105 Decibels - Stock Downpipe
• Full IE Turbo Back 117 Decibels - IE Catback & Downpipe
• Y-Pipe adapter available for stock downpipe

Engineered To Perform

Most aftermarket catback systems for the RS3 are designed to mimic the factory twin pipe setup making it easy to connect to the downpipe. This was fine for factory or mildly tuned setups, however the split pipe system can not keep up with the flow demands of aggressively tuned engines and big turbo setups, causing power loss. The IE catback center pipe is a massive 3.5" straight-through pipe that splits to dual 3" pipes out the back with the valves open. This is enough flow to power even the largest turbo setups    

Exotic Tip Design

Whats the point of a larger exhaust that looks stock? Truly stand out from the crowd with a set of unique stylized exhaust tips. These custom shaped over-sized tips fill up the factory exhaust cut outs and update it with a look that belongs under a modern super car.

Available in your choice of a brilliant polished finish or an optional satin black to match your black optics package.

The exhaust tips are fully adjustable up, down, and in/out. The final look of how they sit is up to you! Choose a flush install or a more aggressive look past the bumper.

Fits With IE Or Stock Downpipe

Note: The IE Y-Pipe Adapter Is Required For Stock Downpipe

The Integrated Engineering Audi 2.5 TFSI 8V 8S Y-Pipe Adapter Kit (RS3 & TTRS) is used to adapt your IE catback to a stock downpipe exhaust section. This high quality stainless steel cast adapter is a complete kit that will make installing our catback to your stock downpipe painless and easy! This part is not required if you are installing Integrated Engineering Audi 2.5 TFSI 8V 8S Performance Downpipe (RS3 & TTRS).

  

Full Turbo Back With IE Downpipe

Looking for Stage 2 or above? Everything you need to install your new IE Catback System to a new or existing IE Downpipe is included. Turn your exhaust into a full unrestricted turboback system.

*IE Downpipe sold separately

 

 Stock Downpipe With Ie Y-pipe Adapter

Installing your catback to your stock downpipe? We made the job easy, everything needed to simply bolt your 3.5" catback to the stock downpipe is included in the optional IE Y-Pipe Kit. 

*IE Y-Pipe Adapter sold separately.

 

Easy Sound Control

The built-in valve system is fully controlled by the factory drive select button just like stock without the need for finicky Bluetooth apps or cumbersome key fobs. Simply select comfort to drive around your suburb like a civilized neighbor -or select dynamic to blow their ears out with that 5 cylinder roar!

*Retains dynamic, comfort, individual, and auto modes.

 

Open Exhaust Valves

With the exhaust valves in their open setting (dynamic mode) the exhaust flows from the main 3.5" pipe into dual 3" pipes and directly out the back unrestricted. This setting offers both the highest flow and loudest sound possible from your exhaust.  

Closed Exhaust Valves

Cruising in comfort mode closes the dual exhaust valves forcing the exhaust to flow from the single 3.5" center pipe into the muffler and out twin 2.5" pipes. This keep the sporty exhaust note, but with a dramatically reduced stock-like noise level.

 

Precision Fit

IE engineers use 3D scanning tools to create a digital duplicate of the vehicle's under body. This provides an incredibly high resolution environment to reverse engineer and rapid prototype a performance exhaust that not only takes advantage of every millimetre of available room, but also results in a perfect fit and easy installation.

Superb Craftsmanship

Each IE catback is manufactured from the highest standard 304L stainless steel, mandrel bent, and TIG welded by hand all using precise fixtures and tooling. We take great pride in knowing your new exhaust is built to last a lifetime.

 

Technology Meets Art

Cutting edge engineering and craftsmanship have blended together at every step from design to manufacturing delivering the highest quality surface finish, fit and material brightness. The exhaust tips feature horizontal, vertical, and depth adjustments so you can perfect them exactly as you wish. Not only will your exhaust sound and perform amazing, it will look the part as well.

Audi 8V.5 RS3 2.5T FSI (2017+) - Saloon only

Does not fit Sportback

IEEXCQ2 (Polished Exhaust Tips)

IEEXCQ4 (Satin Black Exhaust Tips)

Manufactured by

Integrated Engineering (IE)

Photos & Videos