CTS Turbo is proud to aounce our intake manifold for Audi/VW 2.0T MQB

It's time to take your 2.0T to the next level. Our intake manifold is made of cast aluminum in order to take a lot more boost that the OEM plastic unit. With over 40% more volume and equalized air flow, you can be assured that more power is to be had.

The plenum on our manifold has been greatly increase in size and shaped to distribute airflow as evenly as possible to all cylinders.

Features:

• Approximately 40% more volume than stock
• Improved turbo spool and increased HP (with use of proper tuning software)
• Equal flow distribution across all ruers
• Integrated velocity stacks on all ruers
• 1/8 NPT ports under the ruers for water-meth or nitrous nozzles
• Two 1/4 NPT ports for easy boost/vacuum reference for boost gauge or 5BAR MAP sensors
• Retains factory throttle body placement, no adapters required
• Retains factory mounting posts for accessories and brackets
• Deletes factory intake flappers

Must be installed with an MPI fuel system. Any MPI kits are compatible.

For a 5BAR MAP sensor, we recommend using a longer sensor harness. Available separately.

SPECIFIC INTAKE MANIFOLD SOFTWARE TUNING IS REQUIRED.

Feel free to contact us at support@ducocarparts.co.uk should you wish to double check!

Before sending out your ordered part(s), we perform a compatibility check to guarantee that they will fit your vehicle. This verification can be done by using your registration number (UK) or the last 7 digits of your VIN. Kindly provide your car information before proceeding to checkout.

CTS-HW-0484

Manufactured by

CTS Turbo